|
|
Pictured below are a few
of our many Door-Aid products and accessories.
Activators
RB50 - Standard
Wireless Activator
- Large 2" red call button
- Sturdy polycarbonate casing and
face
- 250 Codes
RB100 - Premium Wireless Activator
- Stainless steel face and call
button
- Sensitive microswitch call
button
- 250 Codes
RB200 - Direct-Wire Activator
- Used where "wireless"
activation is not desired
RB100K - Key Switch Activator
- Wallmount
- Used where minimum access
control is required
- Rekeyable 5-pin tumbler
- Two keys included
|
RB50, RB100, RB200
RB100K
|
Transmitters, Receivers &
Electrical Component Accessories
PT100 - Portable
Transmitter-
- Hand held wireless transmitter
- Will activate one or more
operators simultaneously
- 250 Codes
- Large call button (requires find
motor skills)
PT100T - Twin Transmitter Version-
- Will individually activate
adjacent operators
|
PT100, PT100T |
PT200 - Personal
Transmitter-
- Convenient key-ring size
- 250 Codes
|
PT200T |
DA300 - Wireless
Receiver-
- Used to actuate lockstrikes,
magnetic locks
- 24V DC
|
DA300 |
DS7 - Microwave
Motion Sensor-
- High performance microwave
sensor to fully automate door
- Available in Wide (DS7W) or
Narrow (DS7N)
|
DS7 |
| TR-24 -
Transformer- (For DS7 or electric lock strike)
|
TR-24 |
DA1100 - Relay
Control Board-
- Required for use in conjunction
with electric lockstrikes, magnetic locks or sensors (Form
"C" dry contacts)
- Fits into and is powered by the
operator
- Features variable activating and
reset delays
|
DA1100
|
Actuator Arms
AA100L - Actuator
Arm with 2" Short Leg Extension-
- Used with center-pivot door
application. This allows the elbow to reach further around the
door at 90 degrees
|
AA100L |
AA100S - Short
Actuator Arm-
- Used as an alternative to the
standard arm where needed.
|
AA100S |
AA100 - Straight
Arm-
- Used when an
"in-swing" door application has insufficient
sidewall clearance for the "elbow" of the standard
arm.
|
AA100 |
Mounting Brackets
|
